Your entry to high-res audio

Enjoy all the details inyour favorite high-resolution audio files with this set of Next-Generation R-Series component woofers, tweeters, and convenient in-line crossoversystems.Using technology developed for their flagship F#1 Status Series, Alpine built these speakersto befun for enthusiasts interested inhigh-resolution audio playback. Theirultra-wide frequency response ensures adetailed, authentic sound, and thanks to power-handling up to 100 watts RMS, you can play em loud!

Minimal distortion

Alpine optimizestheir R2-S69C 6"x9" 2-way component speaker system for near-perfect sound from premium sources. Thewoofers combination of a highly rigid aluminum frame and a lightweight glass-fiber reinforced woofer cone helps minimize distortion. The high-amplitude multi-roll surroundmaximizes impact while maintaining linearity, so youll get punch with minimal distortion. And speaking of a little more punch, the woofers ferrite magnet and large motor structure will pump up the mid-bass in your music.

Loud and fun

All the exquisitedetail you need is handled by the 1" magnesium hard dome tweeters, which contribute to the "loud and fun" sound associated with Alpines R-Series. Because tweeters can be challenging to install, Alpine provides in-line crossover systems, a threaded removable housing, and a swivel-mount design to make sure you have what you need to make them sound their best.

Product highlights:

• 2-way component speaker system
• 6"x9" glass-fiber woofer cone with High-Amplitude Multi-Roll surround
• 1" magnesium hard dome tweeter
• handles up to 100 watts RMS (300 watts peak power)
• frequency range: 60-40,000 Hz

6"x9" Speakers

General
Speaker Size	6X9
Design	2-way
Tweeter Design	Dome
Impedance (Ohms)	4
Tweeter Composition	Magnesium
Woofer Composition	Glass-Fiber
Woofer Surround	Rubber

Specifications
Sensitivity (1W at 1 meter)	90
Sensitivity at 2.83 volts	N/A
Frequency Response	60 - 40k Hz
Minimum RMS Wattage	---
Maximum RMS Wattage	100
Peak Power Handling (Watts)	300
Top-mount Depth (Inches)	3
Bottom-mount Depth (Inches)	3 3/4
Cutout Diameter or Length (inches)	0
Mounting Height (Inches)	0.476
Frame Width	6.495
Frame Length	9.292

Tweeters

HAMR Surround:The R-Series speakers incorporate Alpines patented High-Amplitude Multi-Roll (HAMR) surround, a technology developed for Alpine subwoofers that maintains control and stability at higher volume levels. HAMR surrounds combine increased cone area and long linear cone excursion for deep, powerful bass response.

Tweeter Mounting Options:The tweeters come installed in a flush-mount housing. Once mounted, the tweeters pivot approximately 15° in any direction, to improve the stereo image. Angled surface-mount housings are also included, or you can install the tweeters behind factory grilles using the included stealth mount brackets. The stealth mount brackets can be top or bottom mounted; they have multiple tabs that can be removed when not needed. The installed tweeter dimensions are:



	Flush Mount (swivel)	Angled Surface Mount	Factory Location (bottom mount)	Factory Location (top mount)
Mounting Depth	0.65"	N/A	0.653"	0.6"
Mounting Height	0.378"	1.325"	0"	0.075"
Cutout Diameter	2.0"	N/A	N/A	N/A
Frame Diameter	2.285"	1.82" x 1.71"	1.726"	1.726"

Crossovers

The included 12 dB/octave in-line high-pass crossovers are wired between the woofers and tweeters. Each woofer has two positive and two negative terminals, one for input from the amplifier, and one for output to the tweeter (via the in-line high-pass crossover). The 12" output wires attached to the crossovers are terminated with quick slides that connect to the terminals on the 30" wires attached to the tweeters. The quick slides on the attached 31" input wires connect to the extra terminals on the woofers. Because the tweeter crossovers are separate, the system can be bi-amped. Two-sided tape is included to mount the high-pass crossovers; their dimensions are:

• Width:1½"
• Height:1¼"
• Length:2?" (3" including wire)

Tweeter Output Level:Each crossover has three tweeter output level options, allowing you to precisely tune the high frequencies to the car interior and tweeter placement. Using the supplied jumpers select -3 dB, 0 dB (flat), or +3 dB.

Each and every product for sale on .com by woofersetc is covered under a (1) One YearWarranty,and can be returned for a period of (1) one year for warranty service. If you have purchased aproductfrom us within the last one (1) year, and it is failing to perform as intended by itsmanufacturer,please email customer service. You will be issued a Return Authorization Number. Returns willnot beaccepted without a previously issued RA#.

In order to maintain an inventory of 100%, Brand New, A-Stock, untouched products, allsales arefinal. We ask that you please be sure you are ordering the correct product.